LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Current Sensor Removal/Installation [PYUL] >> Remove Current Sensor >> Notes

Remove Current Sensor: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove in the order indicated in the table.
Fig 1: Current Sensor Nut With Torque Specifications
G16707067Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Step Part name
1 Nut
(See CURRENT SENSOR REMOVAL NOTE )
(See CURRENT SENSOR INSTALLATION NOTE )		 11 N.m {110 kgf.cm, 95 in.lb}
2 Negative battery cable
(See CURRENT SENSOR REMOVAL NOTE )
(See CURRENT SENSOR INSTALLATION NOTE )		 -
3 Current sensor
(See CURRENT SENSOR REMOVAL NOTE )
(See CURRENT SENSOR INSTALLATION NOTE )		 -
scientia non olet · About LEMON Manuals