LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Crankshaft Position (CKP) Sensor Removal/Installation [001] >> Crankshaft Position Sensor Learning Value Clearing Procedure [PYUL]

Crankshaft Position Sensor Learning Value Clearing Procedure [PYUL]

WARNING: This page is about a different variant/trim than selected.
  1. Shift the selector lever to the P position.
  2. Perform the following procedure within 10 s
    1. Switch the ignition ON (engine off).
    2. Depress the accelerator pedal completely.
    3. Release and depress the brake pedal 5 times repeatedly with the accelerator pedal depressed.
  3. Verify that the wrench indicator light turns on for approx. 3 s, and turns off.
    • If the wrench indicator light does not turn on, Repeat the procedure from Step  1.
scientia non olet · About LEMON Manuals