LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Camshaft Position (CMP) Sensor Inspection [PYUL] >> Inspect CMP Sensor >> Intake camshaft position sensor (visual inspection)

Intake camshaft position sensor (visual inspection)

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative lead-acid battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the intake camshaft position sensor. (See CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION [PYUL] ).
  3. Verify that there are no metal shavings on the intake camshaft position sensor.
    • If there are any metal shavings on it, remove them
scientia non olet · About LEMON Manuals