LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Barometric Pressure (BARO) Sensor Inspection [PYUL] >> Inspect BARO Sensor >> Notes

Inspect BARO Sensor: Notes

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • The BARO sensor is built into the ECM. If the BARO sensor is replaced, replace the ECM.
  • Perform the procedure with the M-MDS connected to the DLC-2.
  • Perform the procedure with the main power switched ON (READY off or on).
scientia non olet · About LEMON Manuals