LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Air Fuel Ratio (A/F) Sensor Removal/Installation [PYUL] >> Remove Engine Compartment Insulator (RH)

Remove Engine Compartment Insulator (RH)

WARNING: This page is about a different variant/trim than selected.
  1. Remove in the order indicated in the table.
Fig 1: Engine Compartment Insulator Screw And Nut With Torque Specifications (RH)
G16706934Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Step Part name
1 Bolt 9.5 N.m {97 kgf.cm, 84 in.lb}
2 Engine insulator -
scientia non olet · About LEMON Manuals