Remove A/F (Air/Fuel Ratio) Sensor: Notes

WARNING: This page is about a different variant/trim than selected.

WARNING:

A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system.

CAUTION:

A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system.

Fig 1: A/F (Air/Fuel Ratio) Sensor With Torque Specifications

Courtesy of MAZDA MOTORS CORP.

TIGHTENING TORQUE SPECIFICATIONS

Step	Part name
1	Connector	-	-
2	A/F (air/fuel ratio) sensor (See A/F (AIR/FUEL RATIO) SENSOR REMOVAL NOTE )	49 L018 001	42 N.m {4.3 kgf.m, 31 ft.lb}