DTC P0328-00: KS System: High Input (PYUL)

WARNING: This page is about a different variant/trim than selected.

P0328: 00 (PCM (PYUL)) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	KS system: High input
Detection condition	The specified period of time has elapsed while the knock sensor voltage is high.
Fail-safe	Sets the knocking spark retard correction value of the ignition control to the fixed value. Inhibits engine-stop by i-stop control.
Repeatability verification procedure	Clear the DTC recorded in the memory. (See CLEARING DTC .) Perform the KOEO or KOER self test. (See DTC INSPECTION .)
Refert to SYSTEM WIRING DIAGRAMS . Courtesy of MAZDA MOTORS CORP.
1	PCM
2	KS
Function explanation (DTC detection outline)	Not applicable