LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Mechanical (VIN A) (3 Of 6)) >> Engine Disassembly/Assembly [PYUL] >> Remove Engine Oil Temperature Sensor/Engine Oil Pressure Sensor >> Connector disconnection note

Connector disconnection note

WARNING: This page is about a different variant/trim than selected.
  1. Pull out the lock of the connector in the direction of the arrow, push down the lock in the direction of the arrow, and disconnect the connector.
G16700478Courtesy of MAZDA MOTORS CORP.
SYMBOL AND CONTENT DESCRIPTION

Symbol Content
(1) (2)... Servicing procedure
scientia non olet · About LEMON Manuals