LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Mechanical (VIN A) (3 Of 6)) >> Engine Disassembly/Assembly [PYUL] >> Disconnect Quick Release Connector (Fuel System) No. 3 >> Quick release connector (fuel system) No. 3 disconnection note

Quick release connector (fuel system) No. 3 disconnection note

WARNING: This page is about a different variant/trim than selected.
  1. Move the retainer upward using a small flathead screwdriver or equivalent.
    G16699286Courtesy of MAZDA MOTORS CORP.
  2. Pull out the quick release connector at a level angle from the opposite side and disconnect it.
  3. Protect the disconnected quick release connector and fuel pipe by wrapping them in plastic to prevent damage or soiling.
scientia non olet · About LEMON Manuals