LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Mechanical (VIN A) (3 Of 6)) >> Engine Disassembly/Assembly [PYUL] >> Disconnect Quick Release Connector (Emission System) No. 1 >> Quick release connector (emission system) No. 1 connection note >> Replacing evaporative hose

Replacing evaporative hose

WARNING: This page is about a different variant/trim than selected.
  1. Press the evaporative hose into the opposite pipe parallel until a click sound is heard and connect.
  2. Press the retainer down with your fingers.
    • If the retainer cannot be pressed down or the checker tab cannot be removed, press the quick release connector further into the opposite pipe.
  3. Pull out the checker tab by hand.
    • Do not use pliers.
scientia non olet · About LEMON Manuals