Diagnosis Procedure and Explanation to Customer

WARNING: This page is about a different variant/trim than selected.

INAPPROPRIATE OPERATION AND CONTROL RECORD 0X30 (TEMPERATURE RESTRICTION CONTROL) (PCM (PYUL)) DIAGNOSTIC PROCEDURE

Step	Inspection	Results	Action
1	PURPOSE: VERIFY CONDITION WHEN INAPPROPRIATE OPERATION AND CONTROL CODE 0x30 (TEMPERATURE RESTRICTION CONTROL) IS OPERATED Did the condition meet the [Operation Conditions]?	Yes	Explain to the customer that the vehicle is normal and the temperature restriction control was performed to protect the vehicle.
1		No	Go to the next step.
2	PURPOSE: VERIFY IF THERE IS ANY MALFUNCTION Has any DTC or pending code been recorded?	Yes	Repair or replace the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE (PYUL) )
2		No	The corresponding troubleshooting for the inappropriate operation and control code is completed.