LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (On-Board Diagnostic - Pcm (VIN A) (1 Of 4)) >> DTC P0014-00: Hydraulic Variable Valve Timing Control System: Over-Advanced (PYUL) >> Repeatability Verification Procedure

Repeatability Verification Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Warm up the engine to allow the engine coolant temperature to reach 80°C {176°F} or more.
  2. Shift to D position and rapidly accelerate the vehicle to 50 km/h {31 mph} (to operate hydraulic variable valve timing control).
  3. Decelerate to idling.
  4. Shift to D position and rapidly accelerate the vehicle to 50 km/h {31 mph} again.
scientia non olet · About LEMON Manuals