LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (On-Board Diagnostic - Pcm (VIN A) (1 Of 4)) >> DTC B10A2-00: Vehicle Collision Determination System: Vehicle Collision (PYUL) >> Function Inspection Using M-MDS

Function Inspection Using M-MDS

WARNING: This page is about a different variant/trim than selected.
B10A2-00 (PCM (PYUL)) DIAGNOSTIC PROCEDURE

Step Inspection Results Action
1 PURPOSE: RECORD VEHICLE STATUS WHEN DTC WAS DETECTED TO UTILIZE WITH REPEATABILITY VERIFICATION 
  • Record the freeze frame data/snapshot data.
NOTE:
  • Recording can be facilitated using the screen capture function of the PC.
 - Go to the next step.
2 PURPOSE: VERIFY IF OPERATION IS NORMAL AFTER VEHICLE COLLISION 
  • Ask customer about vehicle collision experience.
  • Has the vehicle in for servicing been involved in a collision in which the air bag is deployed?
 Yes Explain to the customer that the DTC is recorded as a result of a vehicle collision. Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.
No Go to the next step.
3 PURPOSE: VERIFY SOPHISTICATED AIRBAG SENSOR (SAS) CONTROL MODULE DTC 
  • Perform the DTC inspection for the Sophisticated Airbag Sensor (SAS) control module. (See DTC INSPECTION )
  • Are any DTCs displayed?
 Yes Repair or replace the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [SAS] )
Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.
No Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.
scientia non olet · About LEMON Manuals