i-stop WARNING LIGHT (AMBER) ILLUMINATES [PYUL]: Outline

WARNING: This page is about a different variant/trim than selected.

I-STOP WARNING LIGHT (AMBER) ILLUMINATES (PYUL) DESCRIPTION AND POSSIBLE CAUSE

Description

i-stop warning light (amber) remains illuminated while engine is running.

Possible cause

NOTE:

After switching the ignition ON, the i-stop warning light (amber) turns off after illuminating for 1.5 s for a burnt out bulb check (at engine start).

DTCs are stored in the following modules.
- PCM
- Body control module (BCM)

Instrument cluster malfunction

i-stop warning light (amber) illumination circuit in instrument cluster malfunction

System wiring diagram

Not applicable