DTC P2110-00: Throttle Valve Actuator Control System: Forced Limited Rpm
WARNING: This page is about a different variant/trim than selected.
P2110: 00 (PCM (PYUL)) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Throttle valve actuator control system: Forced limited RPM |
| Detection condition |
|
| Fail-safe |
- Restricts the upper limit of the engine speed.
- Fixes the throttle valve opening angle.
- Inhibits engine-stop by i-stop control.
|
| Possible cause |
- Throttle body malfunction (Refer to [THROTTLE BODY INSPECTION
] in service information).
- PCM malfunction
- Throttle valve actuator control driver internal processor error (built-into PCM)
- Fuel injector control driver internal processor error (built-into PCM) (Refer to [PCM REMOVAL/INSTALLATION
] in service information).
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See CLEARING DTC
.)
- Perform the KOER self test. (See DTC INSPECTION
.)
|
| System Wiring Diagram |
|