Details On DTCs

WARNING: This page is about a different variant/trim than selected.

P0A8F: 00 (PCM (PYUL)) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Power supply system: Low input
Detection condition	Determination conditions	Any one of the following conditions is met: Battery voltage is the standard or less when ignition is switched off after leaving vehicle for 30 days or more. Battery voltage is the standard or less for a continuous 5 days when ignition is switched off.
	Preconditions	Not applicable
	Malfunction determination period	Not applicable
	Drive cycle	2
	Self test type	CMDTC self test
	Sensor used	Current sensor
Fail-safe	Inhibits engine-stop by i-stop control.
Vehicle status when DTCs are output	The engine cannot be started or the engine may stall due to battery voltage decrease.
Possible cause	Battery malfunction Current sensor malfunction PCM malfunction