DTC P0600-00: Serial Communication Link

WARNING: This page is about a different variant/trim than selected.

P0600: 00 (PCM (PYUL)) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Serial communication link
Detection condition	PCM internal malfunction.
Fail-safe	Inhibits engine-stop by i-stop control.
Possible cause	PCM malfunction (Refer to [PCM REMOVAL/INSTALLATION ] in service information).
Repeatability verification procedure	Clear the DTC recorded in the memory. (See CLEARING DTC .) Start the engine and warm it up completely. Perform the KOEO or KOER self test. (See DTC INSPECTION .)
System Wiring Diagram	Not applicable