LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Lubrication System (VIN A)) >> Oil Pump Removal/Installation [PYUL] >> Remove The Front Crossmember Component >> Bolt removal note

Bolt removal note

WARNING: This page is about a different variant/trim than selected.
  1. Make alignment marks at the locations shown in the figure below.
    • Figure also shows the left side (same for the right side).
    G16701921Courtesy of MAZDA MOTORS CORP.
  2. Set and hold a jack to the engine oil pan
    G16701922Courtesy of MAZDA MOTORS CORP.
  3. Remove the bolts.