LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Lubrication System (VIN A)) >> Oil Pump Removal/Installation [PYUL] >> Remove Passenger's Side Front Fender Molding >> Notes

Remove Passenger's Side Front Fender Molding: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove using the procedure shown in the figure below.
    • the figure below shows the left side (same as right side).
G16691624Courtesy of MAZDA MOTORS CORP.
PART NAME DESCRIPTION

Step Part name
1 Front fender molding
(See Front fender molding removal note ).