LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Lubrication System (VIN A)) >> Oil Pan Removal/Installation [PYUL] >> Remove Driver Side Strut Tower Bar >> Wiring harness clip removal note

Wiring harness clip removal note

WARNING: This page is about a different variant/trim than selected.
  1. Remove the wiring harness clips as shown in the figure below.
G16699180Courtesy of MAZDA MOTORS CORP.


  1. Remove the wiring harness clips as shown in the figure below.
G16691471Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals