LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Lubrication System (VIN A)) >> Engine Oil Solenoid Valve Removal/Installation [PYUL] >> Remove Oil Strainer >> Oil strainer installation note

Oil strainer installation note

WARNING: This page is about a different variant/trim than selected.
  1. Apply clean engine oil to the O-ring of a oil strainer.
G16701749Courtesy of MAZDA MOTORS CORP.
SYMBOL AND CONTENT DESCRIPTION

Symbol Content
1 O-ring
Engine oil