LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Lubrication System (VIN A)) >> Engine Oil Solenoid Valve Removal/Installation [PYUL] >> Remove Front Differential >> Front propeller shaft installation note

Front propeller shaft installation note

WARNING: This page is about a different variant/trim than selected.
  1. Rotate the companion flange so that the pin is positioned at the top.
    G16701608Courtesy of MAZDA MOTORS CORP.
  2. Align the front propeller shaft with the companion flange pin and install.
    G16701609Courtesy of MAZDA MOTORS CORP.
  3. After temporarily tightening bolt C, completely tighten it.
  4. After temporarily tightening bolt B, completely tighten it.
  5. Completely tighten bolt A.
scientia non olet · About LEMON Manuals