Remove Member Bracket (LH)

WARNING: This page is about a different variant/trim than selected.

Fig 1: Front Mudguard (LH), Member Bracket, Fasteners And Bolts With Torque Specification

Courtesy of MAZDA MOTORS CORP.

TIGHTENING TORQUE SPECIFICATION

Step	Part name
1	Bolt	11 N.m {110 kgf.cm, 95 in.lbf}
2	Fastener	-
3	Front mudguard (LH) (See PARTIALLY PEELING BACK FRONT MUDGUARD (LH) NOTE )	-
4	Bolt	11 N.m {110 kgf.cm, 95 in.lbf}
5	Bolt	82 N.m {8.35 kgf.m, 60.35 ft.lb}
6	Member bracket	-