LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Lubrication System (VIN A)) >> Engine Oil Solenoid Valve Removal/Installation [PYUL] >> Remove Bracket >> Bracket installation note

Bracket installation note

WARNING: This page is about a different variant/trim than selected.
  1. After installing the front bumper, refer to [HOOD ADJUSTMENT ] and measure the space between the hood and the front bumper.
  2. If the measured value is not within the standard, move the front bumper bracket and adjust the installation position.
scientia non olet · About LEMON Manuals