LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Lubrication System (VIN A)) >> Engine Oil Solenoid Valve Removal/Installation [PYUL] >> Install Oil Pan Drain Plug

Install Oil Pan Drain Plug

WARNING: This page is about a different variant/trim than selected.
  1. Install in the order indicated in the table.
Fig 1: Front Brake Caliper Component, Drain Plate And Bolt With Torque Specification
G16691253Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATION

Step Part name
1 Oil pan drain plug - 35.5 N.m {3.6 kgf.m, 26.05 ft.lb}
2 Gasket Replacement part -
scientia non olet · About LEMON Manuals