LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Intake-Air System (VIN A)) >> Intake Manifold Removal/Installation [PYUL] >> Remove Driver's Side Wiper Arm Cover

Remove Driver's Side Wiper Arm Cover

WARNING: This page is about a different variant/trim than selected.
  1. Remove using the procedure shown in the figure.
Fig 1: Driver'S Side Wiper Arm Cover, Nut With Torque Specifications
G16702119Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Procedure Part name
1 Windshield washer hose
2 Driver's side wiper arm cover
scientia non olet · About LEMON Manuals