LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical (VIN A) (6 Of 6)) >> Timing Chain Removal/Installation [PYUL] >> Remove The Front Crossmember Component >> Damper fork installation note

Damper fork installation note

WARNING: This page is about a different variant/trim than selected.
  1. Insert the bolt shown in the figure below from the front of the vehicle and temporarily tighten the nut.
    • Figure also shows the left side (same for the right side).
    G16701926Courtesy of MAZDA MOTORS CORP.
  2. Lower the vehicle to the ground and tighten the nut to the specified torque.
scientia non olet · About LEMON Manuals