LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical (VIN A) (6 Of 6)) >> Timing Chain Removal/Installation [PYUL] >> Remove Oil Pump Drive Sprocket >> Notes

Remove Oil Pump Drive Sprocket: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove using the procedure shown in the figure below.
Fig 1: Oil Pump Drive Sprocket Bolt With Torque Specifications
G16702003Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Procedure Part name
1 Bolt
(See Bolt removal note )
(See Bolt installation note )		 55 N.m {5.6 kgf.m, 40.55 ft.lb}
2 Oil pump drive sprocket
(See Bolt removal note )		 -
scientia non olet · About LEMON Manuals