Bolt Installation Note
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- Remove any silicone sealant which oozes out into an oil pan installation bolt hole. If silicone sealant penetrates an oil pan installation bolt hole, the cylinder block could become damaged.
SYMBOL AND CONTENT DESCRIPTION
| Symbol | Content |
|---|---|
| 1 | Silicone sealant |
| 2 | Breakage |
- Install the bolts in the order shown in the figure below.
TIGHTENING TORQUE SPECIFICATIONS
| Symbol | Content |
|---|---|
| (1) (2)... | Servicing procedure |
| 23 N.m {2.35 kgf.m, 16.95 ft.lb} |