Remove Starter
WARNING: This page is about a different variant/trim than selected.
- Remove in the order indicated in the table.
Courtesy of MAZDA MOTORS CORP. TIGHTENING TORQUE SPECIFICATIONS
| Step |
Part name |
 |
| 1 |
Nut |
11 N.m {110 kgf.cm, 95 in.lbf} |
| 2 |
Terminal B cable |
- |
| 3 |
Terminal S connector |
- |
| 4 |
BOLT |
44.5 N.m {4.55 kgf.m, 32.95 ft.lb} |
| 5 |
Starter |
- |