LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical (VIN A) (6 Of 6)) >> Short Engine Removal/Installation [PYUL] >> Remove Oil Pump Drive Sprocket >> Bolt installation note

Bolt installation note

WARNING: This page is about a different variant/trim than selected.
  1. Lock the crankshaft pulley lock bolt and install the oil pump driven sprocket bolt.
    G16701724Courtesy of MAZDA MOTORS CORP.
    SYMBOL AND CONTENT DESCRIPTION

    Symbol Content
    1 Crankshaft pulley lock bolt
    2 Oil pump driven sprocket
  2. Remove the temporarily assembled crankshaft pulley lock bolt.
scientia non olet · About LEMON Manuals