LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical (VIN A) (6 Of 6)) >> Short Engine Removal/Installation [PYUL] >> Remove Insulator Bracket No. 2 >> Nut installation note

Nut installation note

WARNING: This page is about a different variant/trim than selected.
  1. Install the nuts as shown in the figure below.
Fig 1: Insulator Bracket No. 2 Nuts Tightening Sequence
G16701523Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Symbol Content
(1) (2)... Servicing procedure
9.5 N.m {95 kgf.cm, 82 in.lbf}