LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical (VIN A) (6 Of 6)) >> Short Engine Removal/Installation [PYUL] >> Remove Insulator (Middle No. 1) >> Notes

Remove Insulator (Middle No. 1): Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove in the order indicated in the table.
Fig 1: Insulator (Middle No. 1) Bolt With Torque Specifications
G16701515Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Step Part name
1 Bolt
(See Bolt installation note ).		 9.5 N.m {95 kgf.cm, 82 in.lbf}
2 Fastener -
3 Insulator (middle No. 1) -
scientia non olet · About LEMON Manuals