LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical (VIN A) (6 Of 6)) >> Short Engine Removal/Installation [PYUL] >> Remove Housing Protector

Remove Housing Protector

WARNING: This page is about a different variant/trim than selected.
  1. Remove using the procedure shown in the figure below.
Fig 1: Housing Protector Bolt With Torque Specifications
G16701641Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Procedure Part name
1 Bolt 9.5 N.m {97 kgf.m, 84 ft.lb}
2 Housing protector -
scientia non olet · About LEMON Manuals