LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical (VIN A) (6 Of 6)) >> Short Engine Removal/Installation [PYUL] >> Remove Front Differential >> Front differential installation note

Front differential installation note

WARNING: This page is about a different variant/trim than selected.
  1. Verify that there are no burrs in the locations shown in the figure below.
    • If there are burrs, remove them with sandpaper.
    G16701607Courtesy of MAZDA MOTORS CORP.
    SYMBOL AND CONTENT DESCRIPTION

    Symbol Content
    1 Front differential side
    2 Oil pan side
    NOTE:
    • If there is oil on the oil pan side, wipe it off.
  2. Verify that the oil seal is not damaged, there is no foreign matter, and the spring is not detached.
    • If there is a malfunction, replace the oil seal.
  3. Verify that there is no foreign matter around the front differential installation area.
  4. Temporarily tighten bolt C and D.
  5. Tighten bolt C.
  6. Tighten bolt D.
  7. Tighten bolt C.
scientia non olet · About LEMON Manuals