LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical (VIN A) (6 Of 6)) >> Short Engine Removal/Installation [PYUL] >> Remove Engine Mount Bracket (LH) >> Nut removal note

Nut removal note

WARNING: This page is about a different variant/trim than selected.
  1. Place alignment marks at the positions shown in the figure below so that they can be assembled to the same positions as before removal.
    G16701603Courtesy of MAZDA MOTORS CORP.
    SYMBOL AND CONTENT DESCRIPTION

    Symbol Content
    1 Alignment mark
  2. Remove the nut.