Remove Catalytic Converter (WU TWC)
WARNING: This page is about a different variant/trim than selected.
- Remove in the order indicated in the table.
TIGHTENING TORQUE SPECIFICATIONS
| Step | Part name | ||
|---|---|---|---|
| 1 | Bolt | - | 44.5 N.m {4.45 kgf.m, 32.8 ft.lb} |
| 2 | Mount rubber | - | - |
| 3 | Nut | Replacement part | 53.5 N.m {5.45 kgf.m, 39.45 ft.lb} |
| 4 | Catalytic converter (WU TWC) | - | - |
| 5 | Gasket | Replacement part | - |