Disconnect Quick Release Connector (Fuel System) No. 2: Notes

WARNING:

• Fuel can easily ignite, therefore always keep sparks and flames away from fuel. If fuel ignites, it could cause serious injury or death and damage to facilities.
• Highly pressurized fuel may spray out if the fuel line is cut. Due to the following dangers occurring with a fuel spray, always complete the [Fuel Line Safety Procedure] to prevent the fuel from spraying.
  • Fuel may cause irritation if it comes in contact with skin and eyes.
  • If fuel ignites and causes a fire, it may lead to serious injury or death, and damage to property and facilities.
• A person charged with static electricity could cause a fire or explosion, resulting in death or serious injury. Before servicing the fuel system, make sure to discharge static electricity by touching a vehicle.

CAUTION:

• If there is foreign matter on the connecting area of the quick release connector it might damage the connector opposite side. To prevent this, disconnect the quick release connector and clean the connecting area before connecting it again.

1. Disconnect in the order indicated in the table.

Courtesy of MAZDA MOTORS CORP.

PART NAME DESCRIPTION

Step	Part name
1	Quick release connector (fuel system) No. 2 (See QUICK RELEASE CONNECTOR (FUEL SYSTEM) NO. 2 DISCONNECTION NOTE ) (See QUICK RELEASE CONNECTOR (FUEL SYSTEM) NO. 2 CONNECTION NOTE )	Engine oil