Remove Cylinder Head: Notes
WARNING: This page is about a different variant/trim than selected.
- Remove in the order indicated in the table.
TIGHTENING TORQUE SPECIFICATIONS
| Step | Part name | ||
|---|---|---|---|
| 1 | Bolt (See Bolt removal note ) |
- | 15 N.m {1.55 kgf.m, 11.05 ft.lbf} +45 N.m {4.6 kgf.m, 33.2 ft.lbf} +90° +90° |
| 2 | Cylinder head (See CYLINDER HEAD INSTALLATION NOTE ) |
TB1217D | - |