LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical (VIN A) (1 Of 6)) >> Capsule Construction Removal/Installation [PYUL] >> Remove Rear Propeller Shaft >> Heater hose connection note

Heater hose connection note

WARNING: This page is about a different variant/trim than selected.
  1. Connect the heater hose as shown in the figure below.
G16699266Courtesy of MAZDA MOTORS CORP.
SYMBOL AND CONTENT DESCRIPTION

Symbol Content
2-6 mm {0.1-0.2 in}


  1. Connect the heater hoses as shown in the figure below.
G16699267Courtesy of MAZDA MOTORS CORP.
SYMBOL AND CONTENT DESCRIPTION

Symbol Content
1 White Marking
2 Yellow marking


  1. Connect the heater hoses as shown in the figure below.
G16699269Courtesy of MAZDA MOTORS CORP.
SYMBOL AND CONTENT DESCRIPTION

Symbol Content
1 Orange marking
2 Green marking
scientia non olet · About LEMON Manuals