Details On DTCs

P24A4: 00 (PCM (H3T)) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	GPF: Excess GPF accumulation (exceeding permissible amount)
Detection condition	Determination conditions	Soot accumulation amount (estimated value) in GPF is the standard or more.
	Preconditions	Not applicable
	Drive cycle	1
	Self test type	CMDTC self test
	Sensor used	GPF pressure sensor
Fail-safe	Inhibits the fuel cut control.
Vehicle status when DTCs are output	A message related to the GPF is indicated on the display.
Possible cause	Excess soot accumulation in GPF Catalytic converter (GPF) clogging or damage PCM malfunction