DTC P18A5-00: Pcm Configuration

P18A5: 00 (PCM (H3T)) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	PCM configuration
Detection condition	The PCM detects configuration data not record.
Fail-safe	Not applicable
Possible cause	The electronic control coupling value is not input to the PCM correctly. (See COUPLING COMPONENT CALIBRATION DATA WRITING.) PCM malfunction (Refer to [PCM REMOVAL/INSTALLATION ] in service information).
Repeatability verification procedure	1. Clear the DTC recorded in the memory. (See CLEARING DTC .)
System Wiring Diagram	Not applicable