DTC P188A-00: Pcm I-ACTIV AWD Control System

P188A: 00 (PCM (H3T)) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	PCM i-ACTIV AWD control system
Detection condition	The PCM detects that the differential oil temperature is higher than the specification.
Fail-safe	Not applicable
Possible cause	Differential oil temperature is higher than specified value. NOTE: Switch the ignition off and allow vehicle to cool down. PCM malfunction (Refer to [PCM REMOVAL/INSTALLATION ] in service information).
Repeatability verification procedure	1. Clear the DTC recorded in the memory. (See CLEARING DTC .)
System Wiring Diagram	Not applicable