DTC P164D-00: Pcm Configuration
P164D: 00 (PCM (H3T)) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
PCM configuration |
| Detection condition |
- PCM detects electronic control coupling calibration data error.
|
| Fail-safe |
- Inhibits the i-ACTIV AWD control.
|
| Possible cause |
- PCM configuration procedure is not done properly. (See
CONFIGURATION.)
- The electronic control coupling value is not input to the PCM correctly. (See
COUPLING COMPONENT CALIBRATION DATA WRITING.)
- PCM malfunction (Refer to [PCM REMOVAL/INSTALLATION
] in service information).
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See CLEARING DTC
.)
- Switch the ignition ON (engine off).
|
| System Wiring Diagram |
|