DTC P0CED-00: Electric Water Pump System: Over Temperature Error

P0CED: 00 (PCM (H3T)) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Electric water pump system: Over temperature error
Detection condition	When the PCM receives from the electric water pump a state signal that the temperature of the electric water pump body is a predetermined value or more.
Fail-safe	Not applicable
Possible cause	1. Malfunction of electric water pump (Refer to [ ELECTRIC WATER PUMP INSPECTION [H3T] in service information).
Repeatability verification procedure	1. Clear the DTC recorded in the memory. (See CLEARING DTC .)
System Wiring Diagram	Not applicable