LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> On-Board Diagnostic - Pcm (VIN C & VIN D) (4 Of 5) >> DTC P0C32-00: MAZDA M Hybrid Boost Battery Cooling System: Function Malfunction >> Function Inspection Using M-MDS

Function Inspection Using M-MDS

P0C32: 00 (PCM (H3T)) DIAGNOSTIC PROCEDURE

Step Inspection Results Action
1 PURPOSE: RECORD VEHICLE STATUS WHEN DTC WAS DETECTED TO UTILIZE WITH REPEATABILITY VERIFICATION 
  • Record the freeze frame data/snapshot data.
    NOTE:
    • Recording can be facilitated using the screen capture function of the PC.
 - Go to the next step.
2 PURPOSE: INSPECT FOR Mazda M Hybrid Boost BATTERY RELATED DTCs 
  • Perform the DTC inspection for the Mazda M Hybrid Boost battery. (See DTC INSPECTION .)
  • Are any DTCs displayed?
 Yes Repair or replace the malfunctioning location according to the applicable DTC troubleshooting.
(See DTC TABLE [MHB (WITH Mazda M Hybrid BOOST)] .)
Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.
No Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.
scientia non olet · About LEMON Manuals