DTC P0335-00: CKP Sensor System: Circuit Malfunction (H3T)
P0335-00 (PCM (H3T)) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
CKP sensor system: Circuit malfunction |
| Detection condition |
- No input signal from the crankshaft position sensor during specified rotation of the exhaust camshaft.
- The crankshaft position sensor input signal pattern received during specified rotation of the crankshaft is incorrect.
|
| Fail-safe |
- Stops fuel injection.
- Stops ignition.
|
| Possible cause |
- Malfunction in wiring harness (including connector/terminal) between CKP sensor and PCM (See CIRCUIT INSPECTION
.) (See CONNECTOR INSPECTION
.)
- CKP sensor malfunction (Refer to [CRANKSHAFT POSITION (CKP) SENSOR INSPECTION
] in Service Information).
- Dirt on CKP sensor detection area
- CKP sensor pulse wheel malfunction
- PCM malfunction (Refer to [PCM REMOVAL/INSTALLATION
] in Service Information).
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See CLEARING DTC
.)
- Perform the KOER self test. (See DTC INSPECTION
.)
|
 Courtesy of MAZDA MOTORS CORP.
|
| 1 |
PCM |
| 2 |
CKP sensor |