Details On DTCs

P0219: 00 (PCM (H3T)) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Engine mechanical: High engine speed
Detection condition	Determination condition	When the engine speed exceeds the upper limit corresponding to each driving range.
	Preconditions	Not applicable
	Drive cycle	1
	Self-test type	Not applicable
	Sensor/unit used	PCM
Fail-safe	Restricts the upper limit of the engine speed.
Vehicle status when DTCs are output	Not applicable
Possible cause	Malfunction caused by the following driving operations: Downhill in the wrong gear Oil penetration to combustion chamber Fuel injector malfunction Refueled with fuel other than specified fuel or mixing PCM malfunction