Details On DTCs
P0196: 00 (PCM (H3T)) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Engine oil temperature sensor system: Function malfunction |
| Detection condition |
Determination conditions |
- The engine oil temperature detected by the engine oil temperature sensor does not increase to the standard or more within the specified period of time after the engine is started.
|
| Preconditions |
- Before starting the engine, leave the vehicle with the engine turned off for 6 h or more.
- The following DTCs are not detected:
- Engine oil temperature sensor: P0197: 00 and P0198: 00
|
| Malfunction determination period |
|
| Drive cycle |
|
| Self test type |
|
| Sensor used |
- Engine oil temperature sensor
|
| Fail-safe |
|
| Vehicle status when DTCs are output |
|
| Possible cause |
- Insufficient engine oil
- Engine oil temperature sensor/engine oil pressure sensor connector or terminal malfunction
- PCM connector or terminal malfunction
- Engine oil temperature sensor incorrect installation
- Engine oil temperature sensor malfunction
- Use of unspecified engine oil
- PCM malfunction
|