DTC U2511-68: Error Signal Received From Electrical Supply Unit (ESU)
U2511:68 (DASH_ESU) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Error signal received from electrical supply unit (ESU) |
| Detection condition |
- The dash-electrical supply unit receives the error signal from the electrical supply unit (ESU).
|
| Fail-safe |
- Control at the default signal value.
|
| Possible cause |
- DTCs are stored in the body control module (BCM). (DTCs related to the electrical supply unit (ESU) are stored). (See DTC TABLE [BCM]
.)
- Electrical supply unit (ESU) malfunction (Refer to [ELECTRICAL SUPPLY UNIT (ESU) REMOVAL/INSTALLATION
]
).
- Body control module (BCM) malfunction (Refer to [BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION
]
).
- Dash-electrical supply unit malfunction (Refer to [DASH-ELECTRICAL SUPPLY UNIT REMOVAL/INSTALLATION
]
).
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See CLEARING DTC
.)
|
| System wiring diagram |
|